1/2″ x 1500′ Cross Woven Poly Strapping Cord for Shrink Wrap Installation

1/2″ x 1500′ Cross Woven Poly Strapping Cord for Shrink Wrap Installation Woven Polyester Strapping is essential to shrink wrapping by providing the support or structure to hold the wrap up and at a favorable angle to shed snow and water, it also acts as an anchor point for the edge of the shrink wrap when not fully encapsulating an object. The shrink wrap strapping can be drawn tight by using the strap-tensioning ratchet also found on our website. **650 lb Tensile Strength   1/2 INCH, REGULAR DUTY WOVEN Product Specification Sheet: table, th, td { border:1px solid black; } Material 100% POLYESTER CORD NOMINAL WIDTH: 1/2 INCH (12 mm) THICKNESS: .025 INCHES BREAK STRENGTH: 650 LBF MINIMUM COIL LENGTH: 1500 FEET (500 YDS., 457m) COIL O.D.: APPROX. 7.50 INCHES COIL I.D.: 3.0 INCH TUBE COIL WIDTH: 5.5 INCH TUBE COIL WEIGHT: 6 LBS. PACKAGING: 1 COIL PER CARTON CARTON: 8″ x 8″ x 5.5″ (LxWxH) CERTIFICATION: THIS PRODUCT CONFORMS TO ASTM DESIGNATION: D 3950; STANDARD SPECIFICATION FOR STRAPPING, NONMETALLIC; TYPE IA, GRADE 2. Mr. Shrinkwrap is a leading distributor of protective products, shrink wrap films and installation supplies with a dedicated team available to take your order at any time of day. We have several experienced shrink wrap installation technicians on staff to help and support you on various aspects of any shrink wrap project. If you would like to place an order over the phone or have questions for us, give Mr. Shrinkwrap a call at 800-847-5290. Cross Woven Polyester Strap is a strong and versatile material for creating structure to support shrink wrap. Strap is also used to hold shrink wrap in place, similar to a belt. Many installers also use the strap like a rope to tie onto their shrink wrap so they can easily pull the wrap over their boat. Several different types of strap are available. You may choose between 1/2″ and 3/4″ strap widths. For both widths, different lengths are available. There’s also a heavy duty 3/4″ strap for those applications that are exceptionally demanding. Regular 3/4″ strap is typically used for load-bearing and other applications where much tension will be applied to the strap, such as the main center strap running the length of a boat and the perimeter strap which acts as a belt around the hull for the shrink wrap. We recommend using a 3/4″ strap for the center and perimeter straps when wrapping a boat, 1/2″ can still get the job done. Our strap is very strong and doesn’t fray when you cut it. The great tensile strength in combination with a light coating around the polyester gives our strap the toughness, resistance from fraying and rigidity to be a must-have in your arsenal of shrink wrapping supplies.